VSAT And SOTM Antenna Systems
VSAT Manpack
Features
YAHSAT, AVANTI and TURKSAT compatible
Highly efficient 67 cm 6 pieces carbon fiber reflector
Easy installation with simple connections
Light weight <15 kg
|
MFA60PACK |
|
|---|---|
| Antenna | 67 cm 6 pieces carbon fiber antenna |
| Mechanism | Elevational over Azimuth |
| Azimuth Range | Continuous |
| Elevation Range | 5° to 80° adjustable |
| Polarization | RHCP / LHCP Circular |
| Frequency Range (RX) | 19.2 - 20.2 GHz |
| Frequency Range (TX) | 29.5 - 30.0 GHz |
| Gain | Rx: 41.6 dBi @20 GHz, Tx: 45.1 dBi @29.8 GHz |
| HPBW | Rx: 1.4 deg, Tx: 0.9 deg |
| Cross Pol. Isolation | 35 dB (Rx) |
| Operating Voltage | 220V AC or 24V DC (optional) |
| Packaging | 1 Case airline checkable bag 66 cm x 38 cm x 36 cm (WxLxH) |
| Weight | <15 kg net weight |
| Operating Temperature Range | -20°C ~ +65°C |
Satcom On The Move Land Vehicle
MSA40 is Ka-band Satcom On The Move antenna. It automatically acquires the satellite and starts to track while vehicle is moving. It provides broadband connectivity via satellite to and land applications. It's best suited for SNG, Disaster Recovery, Mobile Office, Emergency, Security and Rural Mobile Internet services. Thanks to its cutting edge tracking technology, MSA40 provides superiror connectivity even under harshest conditions. Light weight and simple three cable connection to ODU makes it easy to install the antenna. MSA40 is the perfect solution for those looking for affordable and highly reliable solution for ka-band mobile connectivity.
Features
Highly efficient cassegrain reflector
Automatic satellite acquisition and tracking
Ka-band communication
Sensor fusion with Kalman filter
Gyro, GPS, compass, inclinometer sensors
Circular polarisation
Internal signal tracking receiver
Antenna software upgrade over Antenna Control Unit
Ethernet, USB and RS232 interfaces
24 VDC or 220 VAC power options
Typical 30 seconds lock on time
Compliant with Hughes, iDirect, Viasat modems
Easy installation with simple connections
Light weight <20 kg
|
Satcom On The Move Land Vehicle |
|
|---|---|
Reflector & Feed System |
|
| Reflector | 63x50 dual reflector gregorian cassegrain antenna |
| Gain | Rx: 39.1 dBi@20 GHz, Tx:41.2 dBi@29.8 GHz (included OMT and polariser loss) |
| HPBW | Rx: 1.8 deg, Tx: 1.2 deg |
| Cross Pol. Isolation | 27 dB (Rx) |
| RX Frequency | 19.2 - 20.2 GHz |
| TX Frequency | 29.5 - 30.0 GHz |
| RX/TX Polarisation | RHCP / LHCP Cicular |
Tracking System |
|
| Geometry | Elevation over Azimuth |
| Antenna Tracking | Conical Scanning |
| Pointing Error | < 0.4° |
| Speed | 80°/s (Az and El axis) |
| Acceleration | 100°/s (Az and El axis) |
| Azimuth Range | Continuous |
| Elevation Range | 40° to 62° |
| Acquisition Time | <30 sec (connection time depends on the modem) |
| Tracking Source | Internal signal receiver |
| Sensors | Gyro, GPS, Compass, Inclinometer (with Kalman Filter) |
| ODU Dimensions | DxH: 80cm x 40 cm |
| Weight | <20 kg |
| Operating Temperature | -20°C ~ +60°C |
|
Satcom On The Move Land Vehicle |
|
|---|---|
ACU Properties |
|
| External Interfaces | LCD display, Keypad, Ethernet, USB, RS232 |
| ODU Connection | 1 x F-Connector for power and data |
| User Interface | OLED display, 6 buttons keypad, 6 leds and on/off |
| Modem Protocol | OpenAmip |
| Software Upgrade | Over USB or ethernet |
| Mount Type | 19” 1U rack mount |
| Dimensions | HxWxD: 4.4 x 48x20 cm |
| Weight | 4 kg |
| Voltage | 220V AC or 12/24V DC |
| Power | 50W (excluding BUC) |
Environmental and Functional Tests |
|
| Low Temperature | MIL-STD-810F Method 502.4 Procedure-1 |
| High Temperature | MIL-STD-810F Method 501.4 Procedure-1 |
| Temperature Shock | MIL-STD-810F Method 503.4 Procedure-1 |
| Low Pressure | MIL-STD-810F Method 500.4 Procedure-1 |
| Acceleration | MIL-STD-810F Method 513.5 Procedure-2 |
| Mechanic Shock | MIL-STD-810F Method 516.5 Procedure-1 |
| Humidity | MIL-STD-810F Method 507.4 |
| Vibration | MIL-STD-810F Method 514.5 Procedure-1 |
Satcom On The Move Marine
|
Satcom On The Move Marine |
|
|---|---|
Reflector & Feed System |
|
| Reflector | 63cm dual reflector cassegrain antenna |
| Gain | Rx: 39.8 dBi@20 GHz, Tx:42.7 dBi@29.8 GHz (OMT and polariser loss included) |
| HPBW | Rx: 1.7 deg, Tx: 1.1 deg |
| Cross Pol. Isolation | 27 dB (Rx) |
| RX Frequency | 19.2 - 20.2 GHz |
| TX Frequency | 29.5 - 30.0 GHz |
| RX/TX Polarisation | RHCP / LHCP Cicular |
Tracking System |
|
| Geometry | Elevation over Azimuth |
| Antenna Tracking | Conical Scanning |
| Pointing Error | < 0.3° |
| Speed | 80°/s (Az and El axis) |
| Acceleration | 100°/s (Az and El axis) |
| Azimuth Range | Continuous |
| Elevation Range | 5° to 80° |
| Acquisition Time | <30 sec (connection time depends on the modem) |
| Tracking Source | Internal DVB-S2 tuner |
| Sensors | Gyro, GPS, Compass, Inclinometer (with Kalman Filter) |
Physical |
|
| ODU Dimensions | DxH: 80cm x 40 cm |
| Weight | <20 kg |
| Operating Temperature | -20°C ~ +60°C |
MSA60 is 63cm diameter Ka-band Satcom On The Move antenna for maritime applications. It automatically acquires the satellite and starts to track while travelling. It provides broadband connectivity via satellite. It's best suited for maritime broadband applications such as internet, voice over IP, vessel management, and monitoring. Thanks to its cutting edge tracking technology, MSA60 provides superior connectivity even under harshest conditions. Light weight and simple three cable connection to ODU makes it easy to install the antenna. MSA60 is the perfect solution for those looking for affordable and highly reliable solution for ka-band mobile connectivity.
Features
Highly efficient cassegrain 63 cm reflector
Automatic satellite acquisition and tracking
Sensor fusion with Kalman filter
GPS, compass, inclinometer sensors
Circular polarisation
Internal signal tracking receiver
Antenna software upgrade over Antenna Control Unit
Typical 30 seconds satellite lock time
Compliant with Telenor, Eutelsat, Avanti, Turksat and similar operators
Compliant with Hughes, iDirect, Viasat modems
Easy installation with simple connections
|
Satcom On The Move Marine |
|
|---|---|
Antenna Control Unit |
|
| External Interfaces | LCD display, Keypad, Ethernet, USB, RS232 |
| ODU Connection | 1 x F-Connector for power and data |
| User Interface | OLED display, 6 buttons keypad, 6 leds and on/off |
| Modem Protocol | OpenAmip |
| Software Upgrade | Over USB or ethernet |
| Mount Type | 19” 1U rack mount |
| Dimensions | HxWxD: 4.4 x 48x20 cm |
| Weight | 4 kg |
Electrical |
|
| Voltage | 220V AC or 12/24V DC |
| Power | 50W (excluding BUC) |
Environmental and Functional Tests |
|
| Low Temperature | MIL-STD-810F Method 502.4 Procedure-1 |
| High Temperature | MIL-STD-810F Method 501.4 Procedure-1 |
| Temperature Shock | MIL-STD-810F Method 503.4 Procedure-1 |
| Low Pressure | MIL-STD-810F Method 500.4 Procedure-1 |
| Acceleration | MIL-STD-810F Method 513.5 Procedure-2 |
| Mechanic Shock | MIL-STD-810F Method 516.5 Procedure-1 |
| Humidity | MIL-STD-810F Method 507.4 |
| Vibration | MIL-STD-810F Method 514.5 Procedure-1 |
VSAT Antenna Land Vehicle
Neta VSAT auto-point satellite antenna system is used for direct broadband access over any configured satellite in stationary condition. Neta VSAT platform is an auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for direct broadband access over any configured satellite. The system works seamlessly with Neta VSAT Controlbox providing fast satellite acquisition. VSAT system is easily configured to provide instant access to satellite communications for any application that requires reliable and/or remote connectivity in rugged environments. This new generation VSAT terminal delivers affordable broadband Internet services (High-speed access, video & Voice over IP, file transfer, e-mail or web browsing). Ideally suited for industries such as construction sites, mining, oil & gas exploration, military communications, disaster recovery, SNG, emergency communications backup, cellular backhaul and many others.
Features
Ka Band, Ku Band options
Autoskew option for linear polarisation services
Single Dish, high surface accuracy, offset feed, steel reflector
Heavy duty feed arm to support transceiver
Two Axis Motor Controlled Acquisition
Locates satellites using with advanced satellite acquisition methods
|
VSAT Antenna Land Vehicle |
|
|---|---|
Reflector & Feed System |
|
| Reflector | 74 cm offset elliptic antenna |
| Gain | Rx: 40.7 dBi @ 19.95 GHz Tx:44.5 dBi @ 29.75 GHz |
| HPBW | Rx: 1.5 deg, Tx: 1 deg |
| Cross Pol. Isolation | 22 dB (Rx) |
| RX Frequency | 19.2 - 20.2 GHz |
| TX Frequency | 29.5 - 30.0 GHz |
| RX/TX Polarisation | RHCP / LHCP Cicular |
Tracking System |
|
| Geometry | Elevation over Azimuth |
| Antenna Tracking | Conical Scanning |
| Pointing Error | < 0.2° |
| Speed | 18°/sec |
| Acceleration | 10°/sec |
| Azimuth Range | +/-185° |
| Elevation Range | 0° - 80° |
| Positioning Sensors | GPS, eCompass, inclinometer |
Physical |
|
| Dimensions (when closed) | 94cmx108cmx39cm (WxLxH) |
| Weight | 45 kg. |
| Operating Temperature | -15°C ~ +50°C |
|
VSAT Antenna Land Vehicle |
|
|---|---|
Antenna Control Unit |
|
| Antenna Control Unit | 19" Rack Type |
| Satellite - Modem Connection | Single RF cable |
Electrical |
|
| Operating Voltage | 220V AC or 24V DC (optional) |
Environmental and Functional Tests |
|
| Low Temperature | MIL-STD-810F Method 502.4 Procedure-1 |
| High Temperature | MIL-STD-810F Method 501.4 Procedure-1 |
| Temperature Shock | MIL-STD-810F Method 503.4 Procedure-1 |
| Low Pressure | MIL-STD-810F Method 500.4 Procedure-1 |
| Acceleration | MIL-STD-810F Method 513.5 Procedure-2 |
| Mechanic Shock | MIL-STD-810F Method 516.5 Procedure-1 |
| Humidity | MIL-STD-810F Method 507.4 |
| Vibration | MIL-STD-810F Method 514.5 Procedure-1 |